Advantages
2. The thin oil lubrication system adopts redundant design of double oil pump and double filter, which can be lubricated before the equipment is started. It has strong adaptability and easy control, and prolongs the service life of parts.
Parameters
| Product model | Broken cavity type | Standard（STD） | The short head type（SH） | ||
| Small discharge port（mm） A | Tight edge discharge port（mm） B | Small discharge port（mm） A | Tight edge discharge port（mm） B | ||
| CP200 | F | 14 | 95 | 6 | 25 |
| M | 17 | 125 | 6 | 54 | |
| C | 19 | 185 | 10 | 76 | |
| CP300 | EF | 6 | 25 | ||
| F | 13 | 107 | 6 | 25 | |
| M | 16 | 150 | 8 | 53 | |
| C | 20 | 211 | 10 | 77 | |
| EC | 25 | 233 | |||
| CP400 | EF | 6 | 30 | ||
| F | 14 | 111 | 6 | 40 | |
| M | 20 | 198 | 8 | 52 | |
| C | 25 | 152 | 10 | 92 | |
| EC | 30 | 199 | |||
| CP500 | EF | 6 | 35 | ||
| F | 16 | 133 | 8 | 40 | |
| M | 20 | 204 | 10 | 57 | |
| C | 25 | 286 | 13 | 95 | |
| EC | 30 | 335 | |||
| CP800 | F | 16 | 219 | 5 | 33 |
| M | 25 | 267 | 10 | 92 | |
| C | 32 | 297 | 13 | 155 | |
| EC | 32 | 363 | |||
Note: EF= extra fine, F= fine, M= medium, C= thick, EC= extra thick
| Product model | Motor installation power(KW) | Tight edge discharge port（CSS）Under the production capacity（t/h） | |||||||||||
| 6mm | 8mm | 10mm | 13mm | 16mm | 19mm | 22mm | 25mm | 32mm | 38mm | 45mm | 51mm | ||
| CP200 | 160 | 60-75 | 70-90 | 85-115 | 115-145 | 135-175 | 145-185 | 155-195 | 165-215 | 185-230 | 205-245 | ||
| CP300 | 220 | 75-95 | 100-130 | 110-140 | 145-180 | 170-215 | 190-230 | 220-260 | 225-275 | 245-320 | 300-375 | 345-430 | |
| CP400 | 315 | 105-140 | 135-170 | 180-225 | 215-175 | 250-320 | 275-345 | 285-365 | 315-425 | 350-480 | 400-540 | 455-615 | |
| CP500 | 400 | 135-170 | 170-220 | 225-290 | 270-345 | 310-400 | 340-425 | 360-450 | 400-530 | 425-585 | 500-670 | 560-770 | |
| CP800 | 630 | 240-335 | 315-420 | 375-500 | 420-540 | 465-590 | 490-725 | 545-790 | 585-920 | 670-990 | 765-1100 | ||
The above production capacity is the total tonnage of closed circuit production line when the density of crushed material is 1.6T/m³. The production capacity is related to the physical properties of crushed materials, feeding mode, feeding size, and its composition, etc. The actual production capacity may have errors due to different conditions.
